How to Choose the Right Site for a Rotational Molding Factory?

How to Choose the Right Site for a Rotational Molding Factory

When choosing a production site to set up a rotational molding factory, besides factors of rental charge, factory safety structure, and reliable water and electrical supply, the area and space of the site are also important.

Rotational molding manufacturing space

Both rotomolded products and the rotational molding equipment are typically large volume.  Therefore, rotational molding manufacturing space should be at least 5-6 times than that of rotational molding equipment. It also requires space for the storage of the raw materials, finished parts, molds. Moreover, some rotational molded products have relatively large dimensions and weigh hundreds or even thousands of meters. With heavier and larger molds, cranes are necessary equipment for feeding, demolding, shipping, etc. Therefore, when installing cranes of corresponding tonnage in the production workshop, it is necessary to consider a series of issues such as whether the height of the factory is suitable for installing cranes, what tonnage cranes need to be installed, and whether they are easy to operate after installation

In addition, some narrow and long rotomolded products are generally produced by using a swing rotational molding machine. These machines swing up and down significantly in production, which requires a certain amount of space and height. In case there is not enough space for the operation of the crane, it is necessary to borrow underground space and dig pits underground to reduce the horizontal height of the rotational molding machine. When selecting the factory site, it is necessary to inquire whether excavation is allowed, whether there are other underground facilities, how deep it can be excavated if possible, and whether it has any impact on the foundation of the factory building.

Rotational molding warehouse

As time goes by, there are more and more rotational molds pilling up and occupying more and more. Therefore, when choosing a site for a rotational molding factory, it is necessary to consider in advance where these molds will be placed in the future. If it is still relatively small, whether there is potential for expansion in the future.

Some rotomolded products such as the large tanks, boats, vats and many other rotomolded products are extremely large in size. Therefore, before the products are shipped to customers, a large warehousing space is also required. The stocking space should be convenient for the operation of loading and unloading.

Convenient transportation

Rotational molding factory should be located in this place with convenient transportation., the factory gate should be large enough, and it should be next to the road. Large vehicles can directly reach the factory, and it is easy to go in or out. There are no bridges, tunnels, high-voltage lines, etc.

Our rotational molding factory is well-located and situated in the Zhongshan. The traffic is quite convenient. Our factory is well-established and has large space for expansion. View our factory.